Sailboat Building
IMPORTANT INFORMATION
Steps To Building A Sailboat
Author: taamiv
Sailing is one of the most relaxing fun activities that can be enjoyed doing in the hot summer season. It would be surely great to not only have the fun of sailing but the self satisfaction of knowing to build one's own sailboat. Building one's own boat also means that everything is exactly where one wants it to be because it is put over there. Following are some easy guiding steps for making a sailboat one can personally build with pride and sense of accomplishment.
Step one:
First, building plans are needed for the type and style that is needed to be build. A lot of them are available from the free and basic sets to a range of commercial variety that is sometimes quite expensive. In spite of which design is chosen, they all will serve very well otherwise they would not be available to the general public. A number of books are also available that will help in building a sailboat.
Step two:
Next step is lofting. It means that the plywood that is still being used will need the markings set for cutting. These are clearly marked on the plans. Once the markings have been completed, the plywood has to be cut. A circular saw or jigsaw is mostly used for this purpose.
Step Three:
Now when all forms have been cut, the front and back halves will have to be assembled. It is extremely important to assemble these along with other pieces that form the basic structure of the boat. Time would have to be spent for making the form as accurate as possible so that the final product will not suffer later.
Step Four:
The fourth step is to attack the joint edges together using epoxy. Once the epoxy have been brushed the epoxy on and edges are sealed tightly using clamps until the epoxy dries.
It must be made sure that the epoxy has been applied on any fiberglass tape used at the joints. When it is dried, the hulls seams can now be sealed. Duct tape can be used for plastering the outside seams while epoxy resin should be used on the inside seams. When the inside has been dried, the duct tape can be used to cover its whole surface.
Step Five:
Now when the hull has been dried up and set, the next step to do is to work on other details like deck, seat, tiller, storage area and other. When these items have been completed to a level of satisfaction, a maritime paint has to be used for painting both the inside and outside of the new sailboat.
Article Source: http://www.articlesbase.com/cars-articles/steps-to-building-a-sailboat-1978151.html
About the Author
Also learn how to build a sailboat and how to build a septic tank
.
IMPORTANT INFORMATION
